The durability of every luxury kitchen, designer wardrobe, and bespoke architectural doorway begins with its structural substrate. Substandard commercial plywood swells under humidity, delaminates behind expensive laminates, and succumbs to termite infestation. Naturo IS:710 Marine Grade Plywood and IS:2202 Architectural Flush Doors provide the foundational strength that architects and master builders rely on for zero-compromise woodworking.
Structural Certifications & Highlights
Cross-bonded with undiluted Phenol Formaldehyde (PF) synthetic resin; withstands 72 hours of continuous boiling water.
Calibrated in quadruple-sander presses for razor-sharp ±0.2mm uniform thickness without surface dips or waves.
Deep autoclave chemical treatment guarantees permanent immunity against termites, borers, and micro-fungi.
Kiln-seasoned hardwood stiles, rails, and full timber battens prevent door bending and hinge sagging over decades.
1. The Science of Bureau of Indian Standards (BIS) IS:710 Certification
True Marine Grade Plywood must pass rigorous mechanical and chemical endurance testing under IS:710 standards:
- Mycological & Water Resistance Test: Test samples are immersed in boiling water for 72 continuous hours followed by rapid chilling in cold water without showing any veneer separation or edge delamination.
- Adhesion of Plies (Knife Test): Evaluates the molecular bond between adjacent cross-laminated hardwood veneers to guarantee structural integrity under flexural stress.
- Tensile & Static Bending Strength: High modulus of rupture (MOR ≥ 50 N/mm²) and modulus of elasticity (MOE ≥ 5000 N/mm²) engineered for heavy load-bearing furniture and structural framing.
2. Naturo Architectural Flush Doors (IS:2202)
Internal and external entrance doors must maintain strict planar stability. Naturo Flush Doors are fabricated using:
- Kiln-Dried Timber Battens: Moisture content strictly controlled between 8% to 12% to prevent seasonal twisting.
- Reinforced Hardwood Lock-Blocks: Generous solid timber lock blocks on both sides accommodate mortise locks, handles, and smart digital lock mechanisms.
- Hot-Press Consolidated Faces: Sanded flush faces ready for direct application of decorative veneers, acrylic laminates, or polyurethane paint.
3. Technical Specifications
| Parameter | Naturo IS:710 Marine Plywood | Naturo IS:2202 Flush Doors |
|---|---|---|
| Standard Thickness | 6mm, 9mm, 12mm, 16mm, 19mm, 25mm | 30mm, 32mm, 35mm, 38mm, 40mm |
| Core Composition | 100% Selected Hardwood & Gurjan veneers | Kiln-seasoned solid hardwood battens & stiles |
| Bonding Resin | Undiluted Phenol Formaldehyde (BWP) | Phenol Formaldehyde Synthetic Resin |
| Boiling Water Test | 72 Hours Pass (Zero Delamination) | BWP Grade Bonded |
| Thickness Calibration | ±0.2mm across entire board | Uniform planar surface |